Remote control versatile equipment carrier China manufacturer factory distributor

One of the recurring challenges in grounds maintenance is finding equipment that reduces physical effort without compromising control over cutting quality or safety. Many conventional mowers require the operator to walk behind the machine or ride on it, which can become tiring over large areas. Vigorun Tech produces a model called the MTSK1000, which is a remote control versatile equipment carrier. This machine is designed to handle grass, brush, and even snow with an attachment change.

Radio Controlled Tools Carrier China manufacturer factory distributor

For movement, the MTSK1000 uses two walking motors that each have an integrated RV063 worm gear reducer. A worm gear reducer is a type of gearbox that uses a screw‑like worm to turn a gear wheel. This design provides a high reduction ratio in a compact space. One characteristic of worm gear systems is that they can be self‑locking under certain conditions. In this machine, the reducer includes a self‑locking mechanism that activates when power to the motor is cut off. When the operator releases the drive controls or when the power supply is interrupted, the mechanism prevents the motor from turning freely. The high friction between the worm and the worm wheel keeps the motor shaft stationary. As a result, the machine does not roll or slide unintentionally on a slope. This feature may improve safety compared to machines that rely only on braking systems, which could fail if the brake pads wear or if the electrical brake circuit malfunctions.

The travel speed of the MTSK1000 is specified at up to 4 km/h. This speed is not very high when compared to a car or even a riding lawn mower on a flat field. Nevertheless, for a remote‑controlled tracked vehicle, 4 km/h is a common range that allows the operator to maintain visual contact and react to obstacles. At this speed, the cutting quality is likely to remain consistent because the blades have enough time to cut each section of grass thoroughly. The cutting width is 1000 mm, which is approximately one meter. A one‑meter swath means that each pass covers a significant area. For a large lawn or a sports field, the total number of passes needed is lower than with a machine that has a 500 mm or 600 mm deck.

No single machine is ideal for every situation, and the MTSK1000 is not an exception. The 4 km/h maximum speed, while adequate for mowing, may be slower than some operators would like when simply traveling from one area to another without cutting grass. The 1000 mm cutting width, though efficient, still requires multiple passes for very large fields; a tractor‑drawn mower with a 2‑meter deck would cover ground faster. The remote control, while convenient, requires the operator to keep the controller within range and maintain line‑of‑sight to the machine. In heavy rain or dusty conditions, the controller may need protective measures. The engine’s Euro 5 compliance means it requires clean fuel and proper maintenance to keep emissions low; using poor‑quality fuel might affect performance or compliance. These points are not intended as criticisms but as practical considerations for anyone evaluating the machine for purchase.

Model	MTSK1000	VTLM800
Mowing method	Flail mower	Rotary mower
Engine / Power	Twin cylinders, 18Kw / 764cc	Single cylinder, 9.2Kw / 452cc
Walking Motor	48V / 1500W servo motor	48V / 1000W servo motor
Cutting Width	1000mm	800mm
Dynamo	56V 6000W	56V 4000W
Battery	48V 45Ah	48V 20Ah

We are looking for agents, distributors and dealers of remote control versatile equipment carrier all over the world. If you have any further inquiries or require assistance, please do not hesitate to contact us.