Wireless radio control multi-purpose tool handling platform China manufacturer factory distributor

When considering equipment for maintaining vegetation on slopes or uneven terrain, operators often face a trade-off between machine power and safety. Some machines offer strong cutting performance but lack reliable mechanisms to prevent unintended rolling or sliding when parked on an incline. Others focus heavily on stability but sacrifice cutting efficiency or adaptability for different tasks. A range of wireless radio control multi-purpose tool handling platform has been developed to address these concerns, and one example is the MTSK1000 from Vigorun Tech.

Radio Controlled Tools Carrier China manufacturer factory distributor

The MTSK1000 uses a remote control system for both starting the engine and adjusting the cutting height. The operator can start the machine with a single button press, which might be convenient for users who need to begin work quickly. Similarly, cutting height adjustments are made via the remote control rather than manual levers or tools. This approach could reduce the time spent preparing the machine for different grass lengths or ground conditions. The cutting deck and its associated linkage are designed to respond to remote commands, allowing changes without approaching the machine directly. This feature may be useful when the mower is operating on muddy or uneven surfaces where walking close to the equipment could be uncomfortable or impractical.

Power for the cutting operation comes from an 18 kW engine that meets Euro 5 emission standards. This engine drives two 1500 W brushless motors that power the cutting blades. The brushless design typically requires less maintenance than brushed motors, and it tends to generate lower levels of heat during extended operation. The coil diameter in the cutting system is 110 mm, which contributes to the cutting action. Together, these components provide a level of power that appears sufficient for most grass and light brush cutting tasks, though the actual performance will depend on grass density, moisture content, and ground evenness. The engine’s Euro 5 compliance means it produces relatively lower exhaust emissions compared to older engine standards, which might be a consideration in areas with air quality regulations.

The machine’s travel speed is specified at up to 4 km/h. While this is not a high speed compared to wheeled vehicles on flat roads, it may be a practical pace for mowing tasks where thorough cutting is more important than rapid movement. At this speed, the operator can maintain control via the remote while watching the cutting path. The cutting width is 1000 mm, which is relatively wide for a remote‑controlled unit. A wider cutting deck means fewer passes are required to cover a given area. Over a large field or park, this could translate into reduced time spent mowing. Lower time consumption might lead to lower labor costs, as one operator can handle more area per hour compared to a narrower machine. In addition, the reduced physical effort from walking behind or riding on the mower might lessen the workload for groundskeeping staff.

Model	MTSK1000	VTLM800
Mowing method	Flail mower	Rotary mower
Engine / Power	Twin cylinders, 18Kw / 764cc	Single cylinder, 9.2Kw / 452cc
Walking Motor	48V / 1500W servo motor	48V / 1000W servo motor
Cutting Width	1000mm	800mm
Dynamo	56V 6000W	56V 4000W
Battery	48V 45Ah	48V 20Ah

We are looking for agents, distributors and dealers of wireless radio control multi-purpose tool handling platform all over the world. If you have any further inquiries or require assistance, please do not hesitate to contact us.